Heart 2 Heart Challenge: Tags
Welcome to my blog, Paper Crafting With Rebecca! In order to maintain this blog, this page may contain affiliate links and I will be compensated (at no added cost to you) if you make a purchase after clicking my links. Thank you for your support!
Shaker cards are so fun to make and tags are for more than adding to gifts! Combining a tag with a shaker card is fun, easy, and perfect for entering the current Heart 2 Heart Challenge: Tags!
Let me tell you a little bit about my current entry...
I started by using the Snuggle Up Stamp Set to stamp a bunny (and the balloon) using Toffee Exclusive Ink onto a scrap piece of White Daisy Cardstock. Next I had so much fun watercoloring my decorative pieces.
Watercoloring is so relaxing!
While my decorative pieces dried I used my Stitched Rectangle Frames Thin Cuts to cut a frame out of Wisteria Cardstock.
I pulled some other papers out of my stash so I could cut out a tag using the Tags & Tabs Thin Cuts. I cut the window out of the tag and then added a piece of acetate to the tag to create a clear window. Next I cut a piece of patterned paper out of my stash to 4" x 5.25" and adhered it to my white card. I attached the wisteria frame over the top of the patterned paper at a tilt. Then it was just a matter of adding the sparkles and the tag to make a shaker card. I used Thin 3-D Foam Tape so the sparkles will have plenty of room to "shake". I added on my watercolored pieces and a few more embellishments to complete the card!
Thank you for joining me today! If you have any questions please leave them for me in the comments below. Also, consider joining in the fun by entering your own project... links and rules can be found at Heart 2 Heart Challenges.
Happy Paper Crafting,